Crafted Audio · Specification Sheet · Rev ADownload PDF
Specification Sheet
Revision A

FOUR.2e

Network loudspeaker, 4 inch cube — PoE powered, Dante / AES67

Description

The FOUR.2e is the FOUR.2 with the amplifier and the network interface inside it. Power and audio arrive on one Cat cable, so the only rack infrastructure a channel needs is a switch port — no amplifier, no analogue tie line, no rack space.

Mechanically identical to the FOUR.2 but for the connector, and 15 g heavier.

Features

  • Powered over Ethernet — one cable for audio and power
  • Dante and AES67 audio transport
  • ¼-20 recessed nut each side, with thumb screws supplied
  • Deliberately simple — nothing in it needs a firmware campaign

Supply

  • Loudspeaker, assembled, with grille fitted
  • U-bracket and mounting hardware
  • Two per carton

Performance

Power
15 W AES · 30 W peak
Frequency response
170 Hz – 20 kHz
Sensitivity
91 ±3 dB
Ingress protection
IP64

Network and power

Connector
RJ-45, 10/100, sealed
Transport
Dante / AES67 over PoE

Physical

Width
101.6 mm (4.00 in)
Height
101.6 mm (4.00 in)
Depth, overall
124.87 mm (4.92 in)
Moulded shell
93.24 mm (3.67 in)
Grille
91.77 × 91.77 mm (3.61 × 3.61 in)
Mass
720 g (25.4 oz)

Mounting

Bracket
Stainless U-bracket, 16 ga
Bracket thread
1/4-20
Side fixings
2 × 1/4-20 recessed nut
Envelope
119 × 125 × 160 mm (4.7 × 4.9 × 6.3 in)
Crafted Audio, LLC 8051 N. Tamiami Tr. STE E6, Sarasota, FL 34243 · craftedav.com

Warranty — one year from date of shipment against defects in materials and workmanship. Remedy limited to repair or replacement at Crafted's option. Full terms at craftedav.com/warranty.

Balanced mode radiator technology is licensed from Tectonic. Product names of other manufacturers are used only to identify the parts described.

DocCAV-SS-FOUR.2e RevA Issued2026-08-30